Cleaning these areas thoroughly is crucial for end-of-lease cleaning to ensure you leave the property in good condition. Here’s how to clean the bathroom exhaust, shower screen, and mirror:
- Bathroom Exhaust:
- Turn off the power to the exhaust fan.
- Remove the cover carefully and clean it separately with warm soapy water. Rinse and dry thoroughly.
- Use a vacuum cleaner attachment or a damp cloth to clean inside the exhaust fan housing, removing any dust or debris.
- Wipe down the fan blades with a damp cloth.
- Once everything is clean and dry, replace the cover.
- Shower Screen:
- Start by spraying the shower screen with a mixture of equal parts vinegar and water or a commercial shower cleaner.
- Let the solution sit for a few minutes to loosen soap scum and mineral deposits.
- Scrub the screen with a non-abrasive sponge or brush, focusing on any areas with stubborn build-up.
- Rinse the screen thoroughly with water to remove all traces of cleaner and residue.
- Dry the screen with a clean microfiber cloth to prevent water spots.
- Mirror:
- Spray the mirror with a glass cleaner or a solution of equal parts water and vinegar.
- Wipe the mirror with a clean, lint-free cloth or paper towel, starting from the top and working your way down to prevent streaks.
- Pay attention to any spots or smudges, using extra cleaner if necessary.
- For stubborn residue, you can also use a microfiber cloth dampened with warm, soapy water.
- Once the mirror is clean and streak-free, buff it with a dry cloth for a sparkling finish.
- Toilet:
- Start by applying a toilet bowl cleaner or a mixture of baking soda and vinegar to the inside of the toilet bowl.
- Use a toilet brush to scrub the bowl thoroughly, paying special attention to under the rim and around the waterline.
- Flush the toilet to rinse away the cleaner.
- Wipe down the exterior of the toilet, including the tank, seat, and base, with a disinfectant cleaner or soapy water.
- Use a clean cloth to dry all surfaces and remove any remaining moisture or cleaner residue.
- Don’t forget to clean the toilet brush by rinsing it thoroughly and allowing it to dry before storing it.
- Floor:
- Start by removing any rugs or bathmats and shaking them outside.
- Sweep or vacuum the floor to remove loose dirt, dust, and hair.
- Fill a bucket with warm water and a mild detergent or floor cleaner.
- Mop the floor with the cleaning solution, working your way from one side of the room to the other.
- Pay special attention to corners and edges, where dirt and grime can accumulate.
- If there are any stubborn stains, use a scrub brush or sponge to spot clean those areas.
- Allow the floor to air dry completely or use a dry mop or towel to speed up the drying process.
- Windows:
- Start by removing any curtains or blinds from the windows and setting them aside for cleaning.
- Dust the window frames, sills, and tracks with a dry cloth or a vacuum cleaner attachment.
- Mix a solution of equal parts water and vinegar or use a commercial glass cleaner.
- Spray the solution onto the windows and use a clean microfiber cloth or paper towels to wipe them down, starting from the top and working your way down.
- Pay attention to the edges and corners to ensure you remove all dirt and streaks.
- If necessary, use a squeegee to remove excess cleaner and water for a streak-free finish.
- Finally, clean the curtains or blinds according to their specific care instructions before reinstalling them.
- Shower/Tub:
- Spray the shower walls and tub with a commercial bathroom cleaner or a mixture of equal parts vinegar and water.
- Use a scrub brush or sponge to scrub the surfaces, focusing on any areas with soap scum or residue.
- Rinse thoroughly with water to remove all cleaner residue.
- For stubborn stains, you can use a paste made from baking soda and water applied with a sponge or cloth.
- Don’t forget to clean the showerhead by removing mineral deposits with a brush or soaking it in vinegar if necessary.
- Sink and Countertop:
- Clear the sink and countertop of any toiletries, soap dishes, or other items.
- Spray the sink and countertop with a bathroom cleaner or a mixture of vinegar and water.
- Use a sponge or cloth to wipe down the surfaces, paying attention to faucets, handles, and around the drain.
- Rinse thoroughly with water and dry with a clean towel to prevent water spots.
- Grout and Tile:
- Check the grout lines for mould, mildew, or discolouration.
- Apply a grout cleaner or a paste made from baking soda and water to the grout lines.
- Use a grout brush or an old toothbrush to scrub the grout, working in small sections.
- Rinse with water and wipe down the tiles to remove any cleaner residue.
- Cabinets and Drawers:
- Empty out cabinets and drawers, discarding any expired or unused items.
- Wipe down the interior and exterior of cabinets and drawers with a damp cloth or all-purpose cleaner.
- Pay attention to handles and knobs, ensuring they are clean and free of fingerprints.
- Baseboards and Trim:
- Dust or vacuum baseboards and trim to remove any accumulated dirt or dust.
- Wipe down baseboards and trim with a damp cloth or sponge to remove any remaining dirt or grime.
- Pay special attention to corners and edges where dust and dirt tend to accumulate.
- Trash Bin:
- Empty and clean the trash bin with soap and water or a disinfectant cleaner.
- Allow the trash bin to dry completely before replacing the liner.
- Finishing Touches:
- Replace any items you removed during cleaning, such as toiletries, soap dishes, or rugs.
- Check for any spots or streaks on mirrors, windows, and other surfaces, and touch up as needed.
- Ventilate the bathroom by opening windows or turning on the exhaust fan to help dry surfaces and remove any lingering odours.
Remember to also clean other areas of the bathroom, including countertops, sinks, toilets, and floors, as part of your end-of-lease cleaning routine. Take your time to ensure everything looks tidy and well-maintained, as this can help you get your security deposit back and leave a good impression on the landlord or new tenants.
By thoroughly cleaning the toilet, floor, and windows, you’ll ensure that your bathroom is spotless and ready for the next occupants, helping you to meet the requirements for end-of-lease cleaning. If you’re planning to renovate and looking for after-renovation cleaning, then contact Builders Cleaning Melbourne.
By following these steps, you’ll ensure that your bathroom is thoroughly cleaned and ready for inspection as part of your end-of-lease cleaning process.