A keg pump is a machine that helps tap out the keg from the tank. It applies air into the machine (oxygen or carbon dioxide), which is then compressed, pushing the barrel up into the pump. This article will give you tips on how to choose a keg tap.
Keg has become a trendy drink in Kenya today. Over 10,000 bars in the country offer this drink, and people have identified it as one of their favorites. As a keg seller or bar owner, you want to ensure that you can distribute your drink to your customers effectively and faster and do not keep them waiting. What better way to do this than getting a keg pump?
Today some people prefer buying their pump to facilitate their home tap system. It is an intelligent move because, with your home tap system, you can monitor your keg setup and have your own rules. It also saves you a lot of money because you do not have to go to the pubs to have your keg.
The home tap system also gives you the freedom to tap any of your favorite craft beer. Some of these include;
- Guinness
- Surly Furious
- Bell’s 2-Hearted Ale
- Goose Island IPA
Having a keg pump in your home tap and pub system is beneficial. It is henceforth critical to carefully assess the keg pump price in Kenya.
How to use a Keg pump
First, connect the pump, insert the coupler into the keg valve and depress the handle. Ensure the faucet is open before pumping to release the natural keg pressure. Usually, the pressure is in the form of foam. You then pour the beer by squeezing the available faucet (typically black). Pump to maintain a perfect beer flow.
How to clean your keg tap
Keeping your keg pump clean is very important. Cleanliness is crucial because you will not wish to destroy the original taste of the craft beer. So how do you achieve this? All you have to do is follow these steps correctly to ensure your pump is as good as new;
- Mix your detergent with water
- Remove the knob off the tap.
- In the bucket where you have your mixture of water and detergent, insert the knob, faucet, and hose.
- Place the check ball lifter at the bottom of the coupler probe.
- The last step is relatively easy; you must follow the instruction manual to pump the cleaning solution through the system.
How to properly dispense party beer using the party pump
The other question you might ask yourself is how to dispense party beer using the pump. First, tap the keg. Then, open the faucet until all the pressure is ejected. You need to open the faucet and start pumping until the desired flow rate is achieved. When this is done, you can stop pumping. Remember, you should only pump with the spout open to maintain a good beer flow.
Conclusion
These are some of the main aspects you need to know about a keg pump. Want to take your bar experience up a notch? Then get yourself a keg pump today!
